User's Manual

5
ASSEMBLY INSTRUCTIONS
STEP 2:
Attach Front Stabilizer (No. 2) to Main
Frame (No. 1) using 2 Screws (No. 55) and
2 Washers (No. 60). Tighten and secure
with Allen Wrench (No. 74).
STEP 1:
Remove 2 Screws (No. 55) from Main
Frame (No. 1) with Allen Wrench (No. 74),
then remove 2 Washers (No. 60) and
Shipping Tube (No. 78).
NOTE: Don’t discard 2 Screws (No. 55) and
2 Washers (No. 60), because in Step 2, you
need to use them again.
You may discard Shipping Tube (No. 78) or
save it in case you would like to repackage
the item in the future.