MAGNETIC ROWING MACHINE HC108A USER MANUAL IMPORTANT! Please retain owner’s manual for maintenance and adjustment instructions. Your satisfaction is very important to us.
IMPORTANT SAFETY INFORMATION We thank you for choosing our product. To ensure your safety and health, please use this equipment correctly. It is important to read this entire manual before assembling and using the equipment. Safe and effective use can only be achieved if the equipment is assembled, maintained, and used properly. It is your responsibility to ensure that all users of the equipment are informed of all warnings and precautions. 1.
EXPLODED DIAGRAM HARDWARE PACKAGE 2
PARTS LIST No. Description Spec. QTY No. Description Spec.
No. Description Spec. QTY No. Description Spec. QTY 67 Nut M10*1*H8*S14 2 73 C-clip d36 1 68 Screw ST4.2*20*Φ8 6 74 Allen Wrench S6 1 69 Screw ST4.2*16*Φ8 10 75 Spanner S13-14-15-17-19 1 70 Spring Washer Φ8 4 76 Nut M8 1 71 Wave Washer d10*Φ15*0.
ASSEMBLY INSTRUCTIONS STEP 1: Remove 2 Screws (No. 55) from Main Frame (No. 1) with Allen Wrench (No. 74), then remove 2 Washers (No. 60) and Shipping Tube (No. 78). NOTE: Don’t discard 2 Screws (No. 55) and 2 Washers (No. 60), because in Step 2, you need to use them again. You may discard Shipping Tube (No. 78) or save it in case you would like to repackage the item in the future. STEP 2: Attach Front Stabilizer (No. 2) to Main Frame (No. 1) using 2 Screws (No. 55) and 2 Washers (No. 60).
STEP 3: Attach Fixing Axle for Pedal (No. 47) into the bottom hole of Main Frame (No. 1) using 1 Screw (No. 54). Secure and tighten with Spanner (No. 75). Attach 2 Bolts (No. 46) into the upper hole of Main Frame (No. 1) through Pedals (No. 26L/R). Secure and tighten with Spanner (No. 75). NOTE: The Fixing Axle for Pedal (No. 47) should be attached into the middle position of Main Frame (No. 1). STEP 4: Insert the Seat (No. 31) into the Sliding Rail (No. 5). Attach the Sliding Rail (No.
STEP 5: Attach the Sliding Rail (No. 5) to Main Frame (No. 1) using 6 Screws (No. 55) and 6 Washers (No. 60). Tighten and secure with Allen Wrench (No. 74). STEP 6: Take out 2 AAA batteries from the plastic bag with the manual. Push Computer (No. 32) upward, then remove Computer (No. 32) from Main Frame (No. 1). Disconnect Sensor Wire (No. 34) and the wire of Computer (No. 32). Install the 2 AAA batteries into the back of Computer (No. 32). STEP 7: NOTE: The two upper buckles of Computer (No.
ADJUSTMENTS GUIDE CAUTION! Moving parts, such as the seat, can crush and cut. Keep hands clear of the sliding rail during use! ADJUSTING THE RESISTANCE Rotate the Tension Control Knob (No. 11) clockwise to increase the level of resistance. Rotate the Tension Control Knob (No. 11) counter-clockwise to decrease the level of resistance. Tension levels are set at Level 1 being the lowest and Level 8 being the highest.
REPLACING THE BATTERIES Two AAA batteries are included in Computer (No. 32). To replace the batteries, remove Computer (No. 32) from Main Frame (No. 1), and disconnect the Sensor Wire (No. 34) and the wire of Computer (No. 32). Replace both batteries. Do not mix battery types and do not mix old and new batteries. After the replacement, connect Sensor Wire (No. 34) to the wire of Computer (No. 32) and put Computer (No. 32) back onto the Main Frame (No. 1).
EXERCISE COMPUTER Our computerized display console on the Magnetic Rowing Machine allows the user to tailor a personalized workout by monitoring their progress. During a workout, the display console will alternately and repeatedly display your Time, Count, Calories Burned, Total Count, Distance, and Scan (all of the above). With our easy-to-use console, the user can efficiently track their fitness goals from one workout to the next.
FITSHOW INSTRUCTION FitShow Menu 1.Creat a username and password ........................................................................ 12 2.How to connect device ....................................................................................... .12 2.1、Search equipment .......................................................................... 13 2.2、Connecting equipment .................................................................... 13 2.3、Connect successfully ...............................
App Installation Scan QR code Scan the QR barcode to directly locate FitShow in the App Store on your device.Note: In order to scan the QR Code,you must first download the QR READER App on your device. Available in both Apple Store & Google Play Store. 1.
1-1. For first-time users, you must first register a user name and password to save your personal record. If you are registered, please enter your username and password. 1-2. Please use registered mail or mobile phone number, and then enter your account number and password registered sports show. 1. How to connect device 2.1、Search equipment 2-1. Open sports show APP please open your Bluetooth device. Click on the home page of the blue button search device for fitness equipment search. 2.
2-2. Bluetooth scanning is completed, sports show will automatically search your mobile phone near the sports equipment can be connected. 2.3、Connect successfully 2-3. After a successful connection, can be selected according to the mode of exercise you need to. 2. Operational Instructions 3.1 Motion setting 3-1. Change is set in motion in the home or about the movement of the interface on the upper right corner of the "Settings" button, set.
The settings include "voice prompt", 'screen light', 'voice type', 'reminder frequency'. 3.2、Select mode 3-2. After connecting the device, the application will display two modes, you can choose any mode according to your needs, and then click the "start" button for movement. 3.
If you are moving the map mode, click on the lower right corner of the motion map button, you can switch to the map mode interface, view your trajectory. Finish your movement when you press the stop button, the motion show will save the record in your record in the history of the movement. FCC Warning This device complies with part 15 of the FCC rules.
