Operation Guide

Pairing Buon

Power Buon

Mul-funcon Buon

Shines blue

and green alternavely

< 20CM

Wallpost

Method #1 Method #2

10 11

Step 1: Turn on BW20, short press “Mul-funcon” buon to switch to

program 4 “TV watching”

Step 2: Turn on TV002, long press “Pairing buon” for three to ﬁve

seconds, the indicaon light will shine blue and green alternavely.

Step 3: Place TV002 near to BW20 within 20cm and wait for 5 seconds.

Short press TV002 “Pairing buon”, then the indicaon light on TV002 and

BW20 will both shine blue, and the earphone will beep sound to remind

you the pairing is successfully done.

Step 4: Place TV002 near to TV speaker, there are two methods for choice.

1. (Recommendaon) Wallpost is supplied in the package. You can sck the

wallpost under TV002 and then sck TV002 near to the TV speaker.

2. Alternavely, please use 3.5 audio cable to connect TV002 with audio

out of TV.

Step 5: Wear BW20 and start to enjoy your TV programs.

Short press “Mul-funcon buon” to switch among four modes.

BW20 provides four pre-seng program modes.

6. Pairing with TV002 remote microphone

Note: If you need TV002 to pair with more than one BW20,

please repeat step 1 2 3 on each device.

Aenon: The eﬀecve connecon distance is 10 meters. Please use the

device within this speciﬁed distance to avoid malfuncon