Quick Start Guide

20
7. Network Server Configuration
UG65 can work as network server and transmit data to Milesight IoT Cloud or other platform via
MQTT/HTTP/HTTPS.
Make sure the gateway connects to the network as shown in Section 5.
7.1 Connect UG65 to Milesight IoT Cloud
A. Go to “Packet Forwarder” → “General” page to enable the embedded network server.
B. Go to “Packet Forwarder” → “Radio” page to select the antenna type, center frequency and channels.
The channels of the gateway and nodes need to be the same.
C. Go to “Network Server” → “General” page to enable the network server and “Milesight IoT Cloud”
mode.