Quick Start Guide

2
Safety Precautions
Milesight will not shoulder responsibility for any loss or damage resulting from not following the
instructions of this operating guide.
 The device must not be modeled in any way.
 Do not place the device close to objects with naked flames.

Do not place the device where the temperature is below/above the operating range.
 Do not power on the device or connect it to other electrical device when installing.
 Check lightning and water protection when used outdoors.

Do not connect or power the equipment using cables that have been damaged.
Related Documents
This Quick Start Guide only explains the installation of Milesight UG65 LoRaWAN
®
Gateway. For more
functionality and advanced settings, please refer to the relevant documents as below.
Document Description
UG65 Datasheet Datasheet for UG65 LoRaWAN
®
Gateway.
UG65 User Guide
Users can refer to the guide for instruction on how to log in the web GUI, and
how to configure all the settings.
The related documents are available on Milesight website: https://www.milesight-iot.com
Declaration of Conformity
UG65 is in conformity with the essential requirements and other relevant provisions of the CE, FCC, and
RoHS.
For assistance, please contact
Milesight technical support:
Email: [e-mail]
Tel: [phone]
Fax: [phone]
FCC Statement:
Any Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and