User's Guide

4.6.3 Reset to Factory Default

Please select one of following methods to reset device:

Via Hardware: Open the case of UC100, and hold the reset button for more than 10s until the

LED blinks.

Via ToolBox Software: Go to “Maintenance -> Backup and Reset” to click “Reset”.

5. Device Payload

All data are based on the following format (HEX):

Channel1

Type1

Data1

Channel2

Type2

Data2

Channel 3

...

1 Byte

N Bytes

1 Byte

M Bytes

1 Byte

...

Among them, Data field are shown as little endian. For decoder examples, you can find them at

https://github.com/Milesight-IoT/SensorDecoders.