User's Guide

4.6.3 Reset to Factory Default

Please select one of following methods to reset device:

Via Hardware: Hold on power button for more than 10s.

Via ToolBox App: Go to “Device -> Maintenance” to click “Reset”, then attach smart phone with

NFC area to device to complete reset.

5. Installation

Fixed by Screws:

1. Remove the rear cover of the device, screw the wall plugs into the wall and fix the rear cover with

screws on it, then install back the device.

2. Fix the bottom of the device to the rear cover with the theft-deterring screw.

Fixed by 3M Tape:

1. Fix the bottom of the device to the rear cover with the theft-deterring screw.

2. Paste 3M double-sided tape to the back of the device, then tear the other side and place it on

a flat surface.