User's Guide

10
Session Key
Spread Factor If ADR is disabled, the device will send data via this spread factor.
Confirmed Mode
If the device does not receive ACK packet from network server, it will resend
data 3 times at most.
Rejoin Mode
Reporting interval ≤ 30 mins: the device will send specific amount of
LoRaMAC packets to check connection status every 30 mins; If there is no
reply after specific amount of packets sent, the device will re-join.
Reporting interval > 30 mins: the device will send specific amount of
LoRaMAC packets to check connection status every reporting interval; If there
is no reply after specific amount of packets sent, the device will re-join.
ADR Mode Allow network server to adjust datarate of the device.
RX2 Data Rate
RX2 data rate to receive downlinks.
RX2 frequency to receive downlinks
RX2
Frequency/MHz
.
Note:
1) Please contact sales for device EUI list if there are many units.
2) Please contact sales if you need random App keys before purchase.
3) Select OTAA mode if you use Milesight IoT cloud to manage devices.
4) Only OTAA mode supports rejoin mode.