Spec Sheet

c) Use the needle to press the switch in 3 seconds on the bottom of base. This operation can clear all
saved ID card information. The cards can be added after power-on again.
d) Backlight is red and the item is standby if the tablet enclosure is not inserted into the stand.
e) After the tablet enclosure inserted into the stand, backlight will turn blue and the item is in working
state. In working state, ID cards can be added and deleted, and it can swipe the card to depart the
tablet enclosure.IPad is in charging when the power cord is connected.
f) Each time the ID card is swiped, when the blue backlight flash and the buzzersound, the user can
remove the tablet enclosure after the electronic switch of the stand is turned on for 8 seconds.
4.Installation instructions
a) Packing list
deleted successfully.
Note: Once delete the primary card, all secondary cards are also deleted
automatically.
Loss of primary card：
Swipe one secondary card five times in a row within 10 seconds after power-on. Every time, buzzer will sound
once and red light flash once. After 5 times operation, all card information will be deleted. And then cut off the
power. The primary card and secondary cards can be added after power on again.
Loss of secondary cards：
If all 10 secondary cards have been added, then it will need to delete the primary card at first. And then add the
primary card and secondary cards again.
If the secondary cards are not added to 10pcs, then the secondary cards can be added through the primary
card.
The buzzer will sound three times and the red light will flash three times if cards are deleted unsuccessfully.