Spec Sheet
1.Product Overview
2.Specification
3.Operation Instruction
4.Installation instruction
5.Cautions
1.Product Overview
The product is controlled by single chip microcomputer, thus working status is timely indicated via LED
backlight indication and buzzer sound. IPad installed is intelligent charging, and the charging current can
reach 5V/2.1A while with protection of overcharge, overvoltage and overcurrent charging. The high-quality
MOS tube is used to control the LED backlight display and the electronic switch of stand, and tablet
enclosure can be departed by swiping the card.
By adding or deleting settings through smart ID cards,shortcuts method or conventional method can be
chosen accordingly to store 1 main card and 10 sub cards. To protect the safety usage of user, user can
delete a single main card or a single sub card, while they also can delete all ID card information with one
click.
2.Specification
a) Power：
Input voltage;AC100V～240V,50Hz/60Hz.
Output voltage;DC24V/1.25A.
b) Working temperature：0℃～40℃;Working humidity：20%～85%.
c) Storage temperature：-10℃～50℃;Storage humidity：10%～90%.
d) Charging current：≤2.1A
3.Operating Instructions
a) Adding cards:Cards that have been set to the product (eg: primary and secondary cards) are
"associated cards", and cards that have not been set to the product are "unassociated cards".
The primary card：The first card added when the product is powered on.
The secondary cards：The second to the eleventh card added when the product is powered on.Swipe in
"Unlinked Card" (blue light flashes 3 times, buzzer sounds once), add main card is complete
Card type Qty Function Adding method
The
primary
card
1 Add
1.Power on；
2. Swipe in unassociated card. When the blue light flashes 3 times and buzzer
sounds once, it means the primary card is added successfully. This first
added card will be the primary card.
3. Enter the shortcut setting automatically
Positionofswipingcard
Tabletenclosure
Stand