Specifications
OEM/Integrators Installation Manual
Important Notice to OEM integrators 1. This module is limited to OEM installation ONLY. 2. This module is
limited to installation in mobile or fixed applications, according to Part 2.1091(b). 3. The separate approval
is required for all other operating configurations, including portable configurations with respect to Part
2.1093 and different antenna configurations 4. For FCC Part 15.31 (h) and (k): The host manufacturer is
responsible for additional testing to verify compliance as a composite system. When testing the host
device for compliance with Part 15 Subpart B, the host manufacturer is required to show compliance with
Part 15 Subpart B while the transmitter module(s) are installed and operating. The modules should be
transmitting, and the evaluation should confirm that the module's intentional emissions are compliant (i.e.
fundamental and out of band emissions). The host manufacturer must verify that there are no additional
unintentional emissions other than what is permitted in Part 15 Subpart B or emissions are complaint with
the transmitter(s) rule(s). The Grantee will provide guidance to the host manufacturer for Part 15 B
requirements if needed.
Important Note
notice that any deviation(s) from the defined parameters of the antenna trace, as described by the
instructions, require that the host product manufacturer must notify to KOMOO that they wish to change
the antenna trace design. In this case, a Class II permissive change application is required to be filed by
the USI, or the host manufacturer can take responsibility through the change in FCC ID (new application)
procedure followed by a Class II permissive change application.
End Product Labeling
When the module is installed in the host device, the FCC/IC label must be visible through a window on the
final device or it must be visible when an access panel, door or cover is easily re-moved. If not, a second
label must be placed on the outside of the final device that contains the following text: “Contains FCC ID:
2AYYZKMGR1T1R02” “Contains IC: 26995-KMGR1T1R02”. The FCC ID/IC Certification Number can be
used only when all FCC/IC compliance requirements are met.