5. WiFi Connection Setup 1. Download and install APP Download and install the APP on your or your caregiver's smartphone via as forllowing ways: Scan QR code to download Smart Life APP. Search for "Smart Life" via "Google Play" (for Android). Search for "Smart Life" via the apple APP Store (for iOS). 1. 2. 3. 4.
2. Wi-Fi setup for Device and connection In the home page clock mode , press and hold the + button for three(3) seconds to enter Wi-Fi AP mode, Simultaneously, the speaker output the voice whice is AP mode and the LEDs flash. If there are no operation for 3 minutes, the device will exit the AP mode automatically and return the home page clock mode. Press and hold the + button for three(3) seconds again will exit AP mode.
Click go to connect to select match SSID of Wi-Fi, The SSID of Wi-Fi is marked the bottom of device. AP connection successfully, and then click return to return Adding device page. Wi-Fi connection successfully, the is shown on the display screen. If Wi-Fi connection failed please check as follow ways: 1> Is the SSID and password of Wi-Fi correct? 2> If your Wi-Fi is 5GHz, please set it to be 2.4GHz. 3> Reset the device, press and hold + button to enter AP mode again. Re-connect Wi-Fi.
APP Notifications In home page, select "Me"---> Settings ---> APP notification.
Smart pill dispenser
