Manualshelf

Installation Instructions

ManualsBrandsXiamen Joint Tech ManualsAutomotiveElectric Vehicle AC Charger
12345678910
USER MANUAL
3
1.2 Installation Requirements
WARNING: Disconnect electrical power prior to installing the charging station.
WARNING: Be sure to preview the user manual and ensure local building and
electrical codes are reviewed before installing the AC charger.
WARNING: The AC charger should be installed by a qualified technician according to
the user manual and local safety regulations.
CAUTION: Use appropriate protection when connecting to the main power
distribution cable.
CAUTION: Type B, C or D breaker with the rating current for table should be installed
in the upstream AC distribution box.
CAUTION: The device shall be mounted at height between 2 feet and 4 feet from
ground.
CAUTION: Please keep the charger in a clean area with low humidity. Not
recommended to be installed in coastal environments with high humidity or high dust.
1.3 Daily Maintenance
CAUTION: Avoid moisture or water in the charger. If there is water or moisture
ingress in the charger, it is necessary to immediately power off to avoid immediate
danger, and notify the professionals to carry out maintenance before next use.
CAUTION: Please use the charger properly. Do not hit or press hard on the
enclosure. If it is damaged, please contact a professional technician.
CAUTION: Avoid placing the charger near hot objects and at high temperature
locations and away from dangerous substances such as flammable gases and
corrosive materials.
CAUTION: Do not put heavy objects on the charger to avoid danger.