Installation Instructions

USER MANUAL

7. Wire The Circuit

WARNING:

This device must be grounded. Disconnect electrical

power prior to installing the charging station.

WARNING: Improper connection of the equipment-grounding

conductor would result in a risk of electric shock. Check with a

qualified electrician or serviceman if you are not sure whether

the product is properly grounded. Do not modify the plug

provided with the product – if it doesn’t fit the outlet, have a

proper outlet installed by a qualified electrician.

CAUTION: Use appropriate protection when connecting to the

main power distribution cable.

For safe use of electricity, please set circuit

breaker protection in the input part of EV Charger

The wiring is not complicated, just need to follow

the instructions below:

Connect the L1 lead to the grid L1, connect the L2

lead to the grid L2, connect the PE lead to the grid PE.

Circuit Breaker Options table

Output Amperage (A)

16A

32A

40A

48A

70A

80A

Circuit Breaker Options (A)

20A

40A

50A

60A

90A

100A