User's Manual

8.5 Wall-Mounted Bracket Installation
Step 2: Align the rear notch of charger into the wall-mounted bracket and fit the screw
holes of the right and left side.
Step 1:
• Set the positions of the 4 screw holes and drill them, with a diameter of 8mm and
a depth of 52mm.
• Use 4 sets expansion screw and M6 screw to fix the wall-mounted bracket on the wall.
USER MANUAL USER MANUAL
1615
Step 3: Fix two M5 screws to complete the installation.
Overall outlook picture after installation:
Wall-mounted cable winding
Optional cable hanging(optional accessory)