User's Manual

8.2 Installation Steps

Step 1: Use screwdriver to loosen the 13 fixed screws on the rear of charger,

then remove the front cover (for 4G Version).

Step 2: Insert the SIM card according to the picture's instruction (for 4G Version). .

USER MANUAL USER MANUAL

1211

8.3 Wiring

Step 3: Tighten 13 screws on the front cover after the front cover is put back, the

recommended screw torque is 1.0 N.m (9.6 lbf.in) (for 4G Version).

GROUNDING INSTRUCTIONS

This product must be grounded. If it should malfunction or break down, grounding provides a

path of least resistance for electric current to reduce the risk of electric shock. This product is

equipped with a cord having an equipment grounding conductor and a grounding plug. The

plug must be plugged into an appropriate outlet that is properly installed and grounded in

accordance with all local codes and ordinances.

WARNING – Improper connection of the equipment-grounding conductor is able to result in a

risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to

whether the product is properly grounded. Do not modify the plug provided with the product – if

it will not fit the outlet, have a proper outlet installed by a qualified electrician.

IAVERTISSEMENT - Une mauvaise connexion du conducteur de mise à la terre de l'équipe-

ment peut entraîner un risque de choc électrique. Vérifiez auprès d'un électricien ou d'un

technicien qualifié si vous n'êtes pas sûr que le produit soit correctement mis à la terre. Ne

modifiez pas la fiche fournie avec le produit - si elle ne rentre pas dans la prise, faites installer

une prise appropriée par un électricien qualifié.