User Instructions

INSTALLATION INSTRUCTIONINSTALLATION INSTRUCTION
1817
8.2 Operating Steps
8.2.1 Operating Steps With Plug The charger
Please plug the charging connector into the vehicle charging inlet.
STEP2 / Plug The Gun
After power-on,,blue(READY) ,green(CHARGE) and red light (FAULT) all lit. Enter
standby mode and the blue light (READY) is steady on.The time from power on to
the green light on is 90 seconds.
STEP1 / Standby Mode
READY
User authorization
Connect to Vehicle Charging Inlet
Charging Message
Charging completed
8. User Maintenance Instructions
8.1 Operating Procedures
STEP3 :
• Hook the charger to the panel and tighten it with 2 M5 screws
• Connect the power cable behind the pedestal
Instructions for user maintenance shall include explicit instructions for all cleaning and servicing
that are intended to be performed by the user, and shall be preceded by the heading “USER
MAINTENANCE INSTRUCTIONS” or the equivalent.