Installation Instructions

7.5 Wall-Mounted Bracket Installation
Step1 :
• Set the positions of the 4 screw holes and drill them, with a diameter of 9mm and
a depth of 52mm.
• Use 4 sets expansion screw and M6 screw to fix the wall-mounted bracket on the wall.
Step2 :
Align the rear notch of charger into the wall-mounted bracket and fit the screw
holes of the right and left side.
INSTALLATION INSTRUCTIONINSTALLATION INSTRUCTION
1615
Step3 : Fix two M5 screws to complete the installation.
Overall outlook picture after installation:
Wall-mounted cable winding
Optional cable hanging(optional accessory)