Installation Instructions

7.2 Installation Steps
Step1 : Use screwdriver to loosen the 11 fixed screws on the rear of charger,
then remove the front cover(for
4G Version).
Step2 : Insert the SIM card according to the picture's instruction(for 4G Version).
1
2
3
4
56
7
8
9
10
11
IAVERTISSEMENT
- Une mauvaise connexion du conducteur de mise à la terre de l'équipe-
ment peut entraîner un risque de choc électrique. Vérifiez auprès d'un électricien ou d'un
technicien qualifié si vous n'êtes pas sûr que le produit soit correctement mis à la terre. Ne
modifiez pas la fiche fournie avec le produit - si elle ne rentre pas dans la prise, faites installer
une prise appropriée par un électricien qualifié.
INSTALLATION INSTRUCTIONINSTALLATION INSTRUCTION
1211
7.3 Wiring
Step3 : Tighten 11 screws on the front cover after the front cover is put back, the
recommended screw torque is 1.0 N.m (9.6 lbf.in)(for
4G Version).
1
2
3
4
5
6
7
8
9
10
11
This product must be grounded. If it should malfunction or break down, grounding provides a
path of least resistance for electric current to reduce the risk of electric shock. This product is
equipped with a cord having an equipment grounding conductor and a grounding plug. The
plug must be plugged into an appropriate outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
WARNING – Improper connection of the equipment-grounding conductor is able to result in
a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as
to whether the product is properly grounded. Do not modify the plug provided with the
product – if it will not fit the outlet, have a proper outlet installed by a qualified electrician.
GROUNDING INSTRUCTIONS