Installation Instructions

5. Specification
*1 LAN Version or Wi-Fi Version or 4G Version
*2 Wi-Fi Version
*3 4G Version
Model Name
Rated Input Voltage
Rated Output Current
AC Power Frequency
Input Protection
Output Protection
Output Interface
Storage Temperature
Operation Temperature
Relative Operation Humidity
Relative Storage Humidity
RFID Authentication
RJ45 Cable Inlet*1
Wi-Fi Function*2
4G Fnction*3
Cable Length
Protection Level
Installation Type
Altitude
Weight
Dimensions
Status Indication
EVC10 Version
200-240 VAC / Single Phase
16/32/40/48A
60 Hz
UVP,OVP,RCD,SPD,Ground Fault Protection
OCP,OTP,Control Pilot Fault Protection
SAE J1772 AC Charging Connector
-40°C to + 70°C
-30°C to +50°C
95%RH Maximum
95%RH Maximum
LAN Version or Wi-Fi Version or 4G Version
10M/100M Base-T
802.11 b/g/n
LTE
18FT (From charger’s body to lower edge of charging connector)
Type 3
Wall-Mounted
≤ 2000 m
6.5±0.5kg
13.8″x9.8″x5.1″
Red, Green, Blue LED
6. Status Description of the Charger Indication Light
INSTALLATION INSTRUCTIONINSTALLATION INSTRUCTION
0807
Standby - Blue Light
The READY light stays steady in
standby mode.
READY
Waiting for Charging - Green Light
After the vehicle connector is connected
to the vehicle inlet, the CHARGE light is
constantly lit.
CHARGE
Charging - Green Light Flashing
The CHARGE light flashes while
charging.
CHARGE