Use Instructions

±0.2℃ (Temperature 39.0℃ to less than 41.0℃)
±0.3℃ (Temperature greater than 41.0℃)
Operating Temperature
15-40℃ (59-104°F)
Storage Temperature
-25-50℃ (-13-122°F)
Humidity
≤ 95%R.H.
Atmospheric Pressure
70 kPa to 106 kPa
Display
OLED Screen
Display Resolution
0.01℃ or 0.02°F
Dimensions
136.8mm x 11.0mm x 29.0mm
Weight
25g
Memory Function
10 logs
Service Life
5 Years
RF Interface
Bluetooth LE (2400 - 2483.5 MHz): 2402 - 2480
MHz; 0 dBm
NFC (13.56 MHz): 13.553~13.567MHz
FCC Statement
IMPORTANT INFORMATION REQUIRED BY THE FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
this device may not cause harmful interference, and this device must accept any interference received,
including interference that may cause undesired operation.
The equipment is suitable for use in domestic establishments and is tested to CISPR emissions Class B
Group 1 as well as home healthcare immunity criteria found in IEC 60601-1-2 Table 4, 6, and Table 9.
During the IEC 60601-1-2 immunity tests performed the thermometer will accurately measure
temperature or display an error. NC° Thermometer (Gen3) utilizes Bluetooth Low Energy (BLE), which
uses the 2.4 GHz ISM band, BLE operates between 2.402 and 2.480 GHz, and Near Field
Communication (NFC), which uses the 13.56MHz ISM band. NFC operates between 13.553 and
13.567MHz. NC° Thermometer (Gen3) transmits less than-2 dBm effective radiated power. To protect
the environment, dispose of empty batteries at appropriate collection sites according to national or local
regulations. FCC WARNING: Changes or modifications not expressly approved by Intretech could void
the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the