Use Instructions

< TRIMMER >
F/B Sideward Fly Trim
L/R Sideward Fly Trim
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
< SPEED SWITCH >
< EMERGENCY STOP >
(When you hear one long beep from the transmitter that indicates
the drone is adjusted to balance.)
This drone comes with 3 speed modes (Low/ Medium/ High). Press
the Speed Switch button on the upper left of the transmitter to
switch the speed. Increase or decrease one speed at a time. “Di”
indicates Low speed; “DiDi” indicates Medium speed and “DiDiDi”
indicates High speed.
(The Low Speed is default speed mode.)
The Emergency Stop function can be only used in case of
emergency during the ight to avoid any of damage or injury.
Press the upper left and upper right button of the transmitter at the
same time, the motors will stop immediately.
-13- -14-
If the drone drifts forward, hold down the throttle joystick and do
not release it while pushing the direction joystick down to balance
the drone; If the drone drifts backwards, hold down the throttle
joystick and do not release it while pushing the direction joystick up
to balance the drone.
If the drone drifts left, hold down the throttle joystick and do not
release it while pushing the direction joystick right to balance the
drone; If the drone drifts right, hold down the throttle joystick and
do not release it while pushing the direction joystick left to balance