Use Instructions

< FLIGHT >

1. Pair the Drone

2. Calibrate the Gyro

3. One Key Start/ Landing

Tips:

To ensure a stable ight, we suggest that the pilot calibrates

the gyro every time after pairing the drone and after a crash.

After pairing/ calibration, press the One Key Start button, the

propellers will start spinning, indicating this drone is ready to y,

and you can control this drone by using the joysticks. Press the One

Key Landing button again, the drone will land by itself .

As shown in the diagram above, push the left and right joystick

simultaneously to the lower left corner

to calibrate the gyro. The

LED lights on the drone will blink quickly and turn solid. When you

hear 2 beeps from the transmitter that indicates the calibration is

completed.

① Connect the battery port

access to the fuselage power

port.

③ Turn on the transmitter.

④ Push the throttle joystick up

then down to pair the drone

with the transmitter. The LED

indicator lights on the drone will

turn solid if the drone is paired

successfully.

② Place the drone on a at and

level surface with the head

forward and the tail towards the

pilot.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

-11- -12-

All of the operations shown in this manual are demonstrated

using MODE 2.

HEAD

TAIL