Use Instructions
< ALTITUDE-HOLD FUNCTION >
< 360° FLIP >
< HEADLESS MODE >
The drone is designed with altitude-hold function so the drone can
maintain its altitude after you release the left stick( the left stick will
automatically spring back to the middle ).
When you get familiar with all the functions of the drone, you can
try this amazing ip mode. When you y the drone at least 10 feet,
press the 360° Flip button on the upper right of the transmitter, then
push the right joystick Forward/ Backward or Left/ Right, and the
drone will do a ip towards the corresponding direction.
If you are in MODE 1, push the right joystick Left/ Right or push the
left joystick Forward/ Backward, and the drone will do a ip towards
the corresponding direction.
Tips: This function will perform better when the battery is fully charged.
1. After pairing/calibration, press the Headless Mode button on the
transmitter. A beep will be heard from the transmitter, and the
lights on the drone will keep blinking. The transmitter will beep
slowly to indicate that drone is in Headless Mode.
2. Press the Headless Mode button again, and you will hear 2 beeps,
the LED indicator lights on the drone will be solid which indicates
the drone exits the Headless Mode.
-15- -16-
10 Feet
Under Headless Mode, the forward direction is the direction that
the head of drone faces when the drone takes o. In order to make
sure the pilot can tell drone's direction, we recommend that pilots
to stay in the same orientation as the drone head faces when the
drone takes o. If so, when the pilot pushes the direction joystick
forward, the drone will y forward. If the pilot pushes the direction
joystick backward, the drone will y towards him/her. If the pilot
move the right stick left / right, the drone will move left/ right
relative to you. It is very important that the pilot stay in the same
orientation as the drone head faces when the drone takes o.
Please make the pilot stays facing the same direction
as the direction that the head of the drone faces at take-o.
Tail
Tail
Tail
Head
Head
Head










