Use Instructions


Return to Home (RTH)
Press the button to start the RTH, the transmitter makes a beep sound
and the drone will fly back to the recorded Home Point.
Press the RTH button again to exit RTH procedure and regain control of
the drone.
Photo/ Video
Speed Switch
Long press the button “ ” in the upper right corner, the LCD screen
showing “ ”, and you will hear a beep, which means the drone is at the
low speed.
Long press the button “ ” again, the LCD screen showing “ ”, and you
will hear two beeps, which means the drone is at the high speed.
GPS Mode Switch
Emergency Stop
Short press the button and the camera icon “ ” on the LCD screen
flashes once, the camera takes one photo.
Long press the same button, the video icon “ ” on the LCD screen
flashes slowly the camera is taking video. Long press again will exit
shooting.
When turning on the transmitter, the default mode is the GPS Mode. You
can turn off GPS by sliding the switch. Check the icon “ ” or “ ”on
the LCD screen to confirm whether the GPS is on or off.
Press and hold the button ” “ for 3 seconds, the motor will stop immedi-
ately.
Attention: The Emergency Stop function can be only used in case of
emergency during the flight to avoid any of damage or injury.