Owner's Manual

M1S1 ShareVgo Smart Home Rowing Machine
9
4
42
43
40
38
39
1
70
69
20-30°
4
1
Cylinder Block
Step 5 – Connect Sliding Track to Main Frame
Lift up the u-shaped open end of the Main
Frame (1) and the front end of the Sliding
Track (4). Insert the front end of the Sliding
Track into the u-shaped open end of the
Main Frame (1).
Lift the end of the Sliding Track (4) to 20-30
degree so that the Cylinder Block can go in
the u-shaped opening of the Main Frame
(1). Holding them straight, insert Bolt (38)
into the front hole and tighten it with Screw
(40). Tighten the screws using two
screwdrivers (69 & 71).
71
69
Insert the Safety Pin (39) through the rear
hole. Screw Knob (43) with Washer (42)
into the hole on top of the rear square tube
of the Main Frame (1)
1
4
Cylinder Block
◦
43
42
40
39
38