Owner's Manual

M1S1 ShareVgo Smart Home Rowing Machine
10
Step 6 – Tablet Holder Assembly
-
6-1: Install 2 AAA batteries into the
slot at the back of Monitor (49).
6-2: Remove the 4 pre-installed
Screws (68) from the back of the
Monitor (49).
6-3: Attach Monitor (49) to the
Monitor Plate (66) using the 4
Screws (68). Connect the two
Sensor Wires (41) to the two
Monitor Sensor Wires (49) and
make sure it is properly connected.
6-4: Properly connect the two
Sensor Wires (41) of the other end
to the two Sensor Wires coming out
of Main Frame (1). Then, install the
Monitor Plate (66) to the Main
Frame (1) with two Screws (62).
71
69
Pedals and Tension Adjustment
-
Pedal Strap (34) is adjustable to
user’s foot size.
Tension Knob (50) is adjustable
from the lowest tension 1 to the
highest tension 8.
LOW HIGH
6-1
49
6-2
68
68
6-3
68
49
49
41
41
66
6-4
46
41
66
62
1
66