Installation Instructions

3 4
Precautions for use
Suitable
Car repair, driving safety, blackout lighting, outdoor lighting at night,
machine equipment maintenance, etc.
Charging instructions
●
Dual charging method: wired charging/wireless charging
1、Wired charging method：Open the silicone cover at the charging port on
the back of the lamp body, and insert the Type-C plug of the charging cable into
the lamp back. Then insert the USB plug of the charging cable into the DC5V
adapter. The battery indicator on the front of the lamp body flashes to indicate be
charging, when the 4 indicator lights turn to steady on, it means it is fully charged.
Wired charging time：using DC5V/1A adapter for charging, it takes 5.5 hours to
fully charge (The charging time will be different when charging with different
adapters).
2、Wireless charging method：insert the Type-C charging cable into the
input port of the induction pad, and then insert the USB plug of the charging cable
to DC5V 2A adapter, The body of the work light needs to be fully opened at 180
degrees to aiming at the magnet of the induction pad and the limit slot, the two
wireless charging areas will be automatically aligned after mutual absorption.
When charging, if the indicator light of the pad is red and the battery indicator of
the work light flashing, indicating that it is charging. When the indicator light of work
light corresponding 25% is flashing, indicating that the power is about 25%;
When 4 indicator lights are all stable on and the indicator light of the charging
pad is also green, which means that the battery is fully charged.
Wireless charging time：If a DC5V2A adapter is used for charging, it will take
6.5 hours to fully charge, and the charging time will be different if the adapter
is different.
12-month warranty against legitimate manufacturing defects.
Note: Claims resulting from misuse, incorrect use and/or wear are excluded from
warranty coverage.
Warranty
5
●
Work light×2, Wireless charging pad×1, Charging cable×2, Manual×1.
List
●
Do not repair by yourself without professional technicians.
●
In order to ensure the service life of the lithium battery, please stop using it when
the product lighting is obviously dimmed during use, please charge it in time,
otherwise when the voltage of the lithium battery is lower than 2.8V, the product
will enter the protection state, the light will not be turn on when press the switch.
After being fully charged, the product can resume normal use.
●
During the use of the product, do not shoot the eyes directly, so as not to affect
the eyesight (children should be used under the guidance of an adult).
●
Lithium batteries have self-discharge characteristics. It is recommended to
charge the product before using it for the first time; if it has not been used for a
long time, the battery should be fully charged and stored, and recharged every
three months.
●
Please do not put this product close to the fire source, high temperature may
cause explosion and flammability.
●
The base of this product is equipped with a super permanent magnet, please keep
away from easily magnetized objects, such as monitors, bank cards, computers,
TVs, mobile phones and other related products, otherwise it may cause damage.
●
Do not keep the product in contact with sunlight, water, chemicals and corrosive
gases for a long time to avoid damaging the surface of the work light.
●
If the surface of the product, especially the surface of the lighting lamp [PC
transparent window], is stained or dusty, it can be cleaned with a little glass wipe
it off gently with a soft cloth (such as anti-static cloth, glasses cloth). Use a
chemical solution such as alcohol at rest, do not use a hard towel to scrub the
surface of the screen to avoid fluffing and iscoloration of the product surface,
which will affect the appearance; Rough cloth or paper are also not allow to be
used, because these substances are prone to scratches.
Wireless Charger
MAX
5V/2A
MAX
5V/2A
Strong magnetic
mutual attraction
Wireless charging
work light
Wireless
charging pad
Red & green
indicator
Type-C
Wireless charging method
Wireless Charger
MAX
5V/2A
100mm
Strong magnet
and limit slot
Hanging holes
on the back
Wireless
charging area
Type-C input port
Strong magnet
on the back
Hook that can
rotate 360 degrees
Red and green
indicator lights
Wireless charging pad
Wireless Charger
MAX
5V/2A
Manual
Manual
Charging cable Wireless charging padWork light
Instructions for use
Switch description
1. Work light mode via on/off switch⑤: Press1 time=25% light mode, about 250lm;
Press 2 time= 50% light mode, about 500lm; Press 3 time =100% light mode,
about 1000lm.
2. Flashlight mode via on/off switch⑤: When in standby or working light state, to
press and hold the switch1.5S to turn on the flashlight at 100% light mode,
about 100lm; Press 2 time, to shut down.
3. In the flashlight mode, long press the switch ⑤ for 1.5S, will turn on working
lighting at 100% level brightness, and then long press for 1.5S again to switch
turn on back to the flashlight at 100%, cycle in turn, short press the switch to
turn off the light.
*This product is forced to turn off the light when charging to protect the
battery to be more safely and more durable.
In use, when the brightness of the lamp tube is obviously dimmed or the
lamp flickers, please charge it immediately.
Note