Installation Instructions

1
INSTRUCTIONS
Product parameter
2
21828
75cd
17m
25% 50% 100%
12h
1.5 Meters
Work light
250lm
150cd
25m
6h
500lm
300cd
35m
3h
1000lm
230cd
25m
18h
100lm
IP 54
100%
Flashlight
Item No.
FL-1 STANDARD
Light
output
Run time
Beam
distance
Peak beam
Intensity
impact
resistance
Note: Above data according to the international torch described in standard
ANSI/NEMA FL1 measurement method, used by the battery of lithium
polymer battery (3.7 V / 4000mAh-21700), different battery or using
environment may impact on the above data.�
IP
Thank you for purchasing our products
Please read this instructions carefully before using
And please keep it carefully
Customer Sevice: [e-mail]
Appearane and function indication
21828
MAX
5V/2A
Working Light
Features
●
Built-in LED light source：
Work lighting uses 16* 0.5W 2835 led source; flashlight lighting uses 1* 2W 2016
led source.
●
There is a hardware hook at the bottom, which can be hung to release your hands.
The lamp body can be adjusted up and down 180 degrees, clockwise 90 degrees,
counterclockwise 180 degrees.
●
Installation method：Both the back and the bottom are equipped with high-
strength magnets, which can be attached to any metal iron equipment.
⑨Hardware hook
①Flashlight
③Aluminum shell
Can be rotated
180 degrees
④Battery indicator
⑤Switch
⑥Silicone cover
⑦Magnets
⑧Type-C Charging
interface
Positioning magnet
Rotate 90 degrees
clockwise.
Rotate 180 degrees
counterclockwise.
②Work light
Wireless charging
area
⑩Strong magnet
●
Adopt high-quality rechargeable lithium-ion battery, high-efficiency circuit, and
long working time.
●
It is equipped with a safe and intelligent detection battery power status display
circuit, which makes charging more intuitive and faster.
●
Through scientific simulation and design of working lighting environment, there
is no stroboscopic, uniform and soft spot.
●
Dual charging method：wired charging, with Type-C charging interface,
universal to all 5V output adapters, convenient for charging; Wireless charging,
with the wireless charging stand with magnetic suction, the front side adsorption
work light , wireless charging is safe and reliable.
●
The Type-C charging port uses a silicone protective cover to effectively waterproof,
block sand and dust, and prevent external impact from damaging the charging port.
●
The shell material adopts PC, ABS, aluminum profile and silica gel material.
High light transmittance, anti-high and low temperature, explosion-proof.
●
Working environment：-20°~ 45° can work normally in harsh environments.
●
Industrial-grade performance：drop resistance, impact resistance IK07,
waterproof grade IP54.
●
Dimensions(L×W×H)：45×37×175(325)mm
●
Weight：260±10g