User's Manual

GROUNDING INSTRUCTIONS
Grounding Pin
Grounded Outlet Box
Grounded Outlet
This product must be grounded. If it should malfunction or break down, grounding provides a path of least
resistance for the electric current to reduce the risk of electric shock. This product is equipped with a cord with
an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet
that is properly installed and grounded in accordance with all local codes and ordinances.
Danger-Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check
with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do
not modify the plug provided with the product – if it will not fit the outlet, have a proper outlet installed by a
qualified electrician.
The massage chair is connected to the power
supply but is not functioning
1. Check to see that the plug is properly connected
and working
2. Ensure the massage chair switch is in the ‘I’
position
Possible overheating due to prolonged use. Turn off
the power for at least 30 to 50 minutes
1. Ensure the chair is plugged into a working outlet
2. Turn the power OFF and ON again
The remote control works but the massage chair
is not functioning.
Both the remote control and the massage chair
are not functioning
This massage chair is controlled by a microcomputer and is thus susceptible to power surges of +10 to-15%.
The following situations may arise in the event of a power surge:
If you continue to have problems, please read the warranty card and contact the Ogawa service department.
TROUBLESHOOTING
38
Caution
Caution
• Do not use abrasive cleaning agents like benzene or thinner to clean the massage chair. This
may cause the upholstery to fade.
Caution
• Do not use a wet cloth to clean the controller.This may result in malfunction.
PRODUCT CARE AND STORAGE
1. Storing the Massage Chair
2. Cleaning the Massage Chair
• Use only a clean, dry cloth to clean the controller.
3. Cleaning the Controller
• Do not store the massage chair in dierct sunlight or in places of high temperature. This may
cause the color of the upholstery to fade.
• Do not allow the massage chair to remain in contact with vinyl or wallpaper for extended
periods of time as this could lead to discoloration.
• Wipe off dust and dirty from the massage chair with a dry, soft, clean cloth after use.
• Keep the massage chair clean and away from places of high humidity.
• If the massage is not to be used for a long period of time, cover the massage chair with a dust cover and
unplug its power plug from the electrical outlet.
• Before cleaning, ensure that the main power switch is off and the power plug is disconnected from the
electrical outlet.
• Wipe off dust and dirt from the massage with a dry, soft, clean cloth after each use.
• This product can be cleaned thoroughly with a slightly damp cloth.
• Do not iron the upholstery.
• Do not wash the upholstery using a home washing machine as this may result in deterioration of the
upholstery’s quality.