ON/OFF Button Touch screen (Operation main page) Touch keys AUTO 14
Press this key to start the massage chair. Backrest and footrest of the massage chair are automatically adjusted to the default angle. The remote control enters the operation main page. Press this key again. Massage function stops. The massage mechanism, backrest and footrestrestore to its original position. The massage chair is turned off.
‘Auto’ Massage 1.Select 'Auto' function on the operation main page. 2.There are 15 massage modes to select from.After the selection, relevant massage starts. The remote control enters 3.the adjustment page. 4.Body scanning will commence when the program is selected . ( Screen will show Scanning ）. 5.Please sit as far back in the seat as possible with your head on the pillow during the scanning Adujstment notes 1 . 3D : Touch3D to adjust 3D massage intensly ( 6 levels) 2 .
‘Manual’ Massage 1.Select ‘Manual’ function on the operation main page. 2.There are 15 massage modes to select from.After the selection, relevant massage starts. The remote control enters 3.the adjustment page. 4.Body scanning will commence when the program is selected.(Screen will show Scanning). 5.Please sit as far back in the seat as possible with your head on the pillow during the scanning. Note There are 2 modes for Kneading,Tapping,K & T,Shiatsu and Clapping.
Adujstment notes 1.3D : Touch 3D to adjust 3D massage intensity(6 levels) 2.Strength : Touch Strength to adjust Kneading strength(5 levels) 3.Speed : Touch Speed to adjust Tapping speed(5 levels) 4.Width : Touch Width to adjust Rolling width(3 levels) 5.Spot : Touch Spot to activate spot massage The massage roller will spot on the position it goes when user press the button Press again to cease spot massage. 6.
‘Local’ Massage 1.Select ‘Local’ function on the operation main page. 2.Select 1 of 4 local programs.After the selection, relevant massage starts. The remote control enters the adjustment page. Adujstment notes 1.3D:Touch 3D to adjust 3D massage intensly ( 6 levels) 2.Strength:Touch Strength to adjust Kneading strength ( 5 levels) 3.Speed:Touch Speed to adjust Tapping speed ( 5 levels ) 4.
‘Air’ Massage 1.Select ‘Air Massage’ function on the operation main page to start the air massage. 2.Touch Intensity to adjust the intensity of air massage ( 5 levels ) ‘Advanced’ Massage Select ‘Advanced’ function on the operation main page.After the selection,relevant massage starts: Select from 3 core programmes: LED,Heating,Foot roller. These 3 programmes can be used at the same time.
Heating Touch Heating to start heating function.Press once to activatelumbar heating function.ress again to activate calf heating function. Press again to cease heating function. Foot roller Touch foot roller to start foot roller function . Press again to cease foot roller function. LED Touch LED to turn on the LED light on the speaker. Press again to turn it off. Ύ Ώ Position 1 Footrest Direction Adjustment Key: Press to lift or lower, extend or retract the footrest.
3 Zero Gravity Key: Press to enter the Zero Gravity position (the most relaxed and comfortable state of position). Press again to restore to the last position. This key cannot beeffected under ‘Stretch’ function.
06 3.
