Osaka? Instruction Manual Model No. EC-626E Before operating this unit, please read these instructions completely.
Contents Before Use Safety Precautions 1-4 Chair COMPONENTS rein seen 3-5 « Bluetooth Speaker 4 Setting up the massage chair ni 8 Preparation before Use How to Use CONTENT oeuvre rrr 10 HOW IO USE... eee 11-15 Q&A / Important Cleaning and maintenance ees 16 Troubleshooting... 17 Grounding irr 18 Chair Specifications... ...cocovveirveeiei ins sere antes 19 Thank you for purchasing this Massage Chair.
Safety Precautions When using the massage chair, basic precautions should always be followed to reduce the risk of semicircle shock, bums, fire or injury to persons. Please read the following precautions before using the massage chair. e Make sure the power plug Is securely inserted info a proper electrical outlet to reduce the risk of short-circuit and fire. [t is highly recommended that a surge protector is used to prevent from damage.
Safety Precautions ® Please consult your doctor if you are in doubt as to whether or not you should use this massage chair. # Please consult a doctor before using the massage chair if you are pregnant, undergoing any medical treatment, using a medical electronic device such as a pacemaker, or are experiencing any of the following: malignant tumor, heart disease, back pain, abnormal or curved back bone, osteoporosis or acute less.
Chair Components Front @ Pillow Pad @ Bluetooth Speaker (See Page 5) @ Shoulder side massage section @ Backrest Pad (® Hand and arm massage section ® Seat @ Leg rest ® Controller Storage Compartment
Chair Components Bluetooth Speaker NG NOTE: The Bluetooth speaker can only connects with one Bluetooth device at a time. Please turn off your Bluetooth device after using so that other users can enjoy it as well.
Setting up the massage chair 1. Installation Position. = Ensure there is adequate space fo recline. 3.15 Approx. 51.18" Product's area in contact with the floor. Footrest’s area in contact with the floor. = Do not expose the massage lounger to direct sunlight or high temperatures, such as in front of heating sources, because this can cause discoloration or hardening of the synthetic leather. + Place the unit on a mat to prevent floor damage.
Preparation before Use 1. Check the space around the product. Make sure there is no person, pet, or other object close to the product. 2. Make sure there Is no foreign matter in the seams of the product. + Before sitting on the product, make sure there is no foreign matter between any two parts not put hands, arms or head between the backrest and the back cover. « Do not put pets on the product (such as its back cover, backrest and armrests).
Preparation before Use 3. Power on the product (1 Push the power connector into the appliance inlet till the end. (@ Insert the power plug into the power outlet fill the end. (3 Turn the switch to "I" position 4. Make sure the massage rollers are retracted. if they are not, press ON button fo return them to the retracting position.
Preparation before Use 5. How to use the foot massage @ Pull the switch to unlock the foot massage. (2) With a light step,you can turn over the leg rest. Foot massage restoration Make sure foot massage reset to the correct position (as following picture shows). If not,may result in fabric or whole chair damaged.
How to Use Product Operation Guide Connect to the power supply, then turn the switch thus the chair will be in idle mode, and the backrest angle will reach the highest position as well as the footrest angle will reach the lowest position. During its idle mode, there are only five Incline, Recline, Incline Leg, Recline Leg that can be operated. Control Buttons for the Massage Chair 1. ON/OFF The Start/Stop Control Button Press once on this button, the LCD back light and ON/OFF button will be lit.
How to Use Auto program If the either 1 of the 6 auto program is activated, chair will automatically performing a shoulder height scan.And the theme will go to shoulder adjustment automatically, user can manually adjust the shoulder height position to the desire comfortable poi-tion before auto program start. The following are the auto program available: §. Neck/Shoulder 6. Strengthen 7. Relax 8. Thai 9. Recover 10. Sleeping 11/12.
How to Use 14/15. Backrest Incline / Recline Angle Adjustment Control Button for Massage Chair These two control buttons can adjust the Backrest Inclining/Reclining angle respectively. Press once on the Inclining or Reclining control button,and the Backrest will start to move. When the Backrest reaches the desired comfortable position,press the button again to stop it. 16.
How to Use 20. Spot / Partial The Spot or Partial Back massage This button allows the user to select spot massage for any part on the back. Press this button once to activate spot massage at the required location. Press this again to switch to partial function. The Partial Back massage While running spot massage, when this button is pressed again, the massage will change from spot to partial. the massage will take the spot position as the center to perform partial massage at a distance of approximate 8 cm.
How to Use 25. Manual Air Setting Air Squeeze Every time this button is pressed, the manual air-pressure massage function will change in the sequence of LEGREST>ARMREST>SHOULDER>STOP. 26. Intensity The Intensity Adjustment Bunion for Air-pressure levels of intensity to be adjusted. After activating the air-pressure function{Auto and Manual), press this button to adjust the intensity in the cycle. 27.
Cleaning and maintenance 1. Cleaning of the synthetic leather BORN Wipe the synthetic leather with a soft dry cloth. not clean the product with chemicals such as thinners, gasoline and alcohol. wafer / mid detergent * When using a leather maintenance product {cleaning cloth) sold on the market, follow its directions for use. « if the synthetic leather is very dirty, wipe it with the method below. @ Put a piece of soft cloth into water neutral detergent contained hot water and wring it out.
Troubleshooting This page summarizes the most common problems you could encounter with the product. If you are unable to solve the problem with the information below, contact service center immediately. If the problem encountered is not listed, please try the following suggestions: 1. Turn off the product and unplug it. 2. Wait for 60 minutes. 3. Plug the product back to the recommended outlet and restart. 4. If the problem persists, contact the authorized service center.
Grounding Instructions This product must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for the electric current to reduce the risk of electric shock. This product is equipped with a cord with an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
Chair Specifications Mode! No. EC-626E Rated Voltage 110-120V~ Rated Frequency B0Hz Rated Power Consumption 260W Timer §/10/15/20/25/30 minutes Max Time Rate 30 minutes Dimensions{L Upright: Reclined: Weight Gross Weight: Approx. 242.5 Ibs Net Weight: Approx. 207.2 Ibs Length of Wire Controller wire: 58.0" Power supply wire: 70.
FCC Radiation Exposure Statement FCC Radiation Exposure Statement: (mobile device) This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, Human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation. FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules.
