User's Manual

21
This page summarizes the most common problems you could encounter with the


If the problem encountered is not listed, please try the following suggestions:
1. Turn off the product and unplug it.
2. Wait for 60 minutes.
3. Plug the product back to the recommended outlet and restart.

The product
does not work
The product
stopped
working
The product
stopped
working
The product
does not work
The product is
abnormally
warm
Noise can be
heard from the
product
The product is not plugged
in properly.

product corresponds to the

then plug in again.Make
sure the outlet is properly
working.
If you want another session,
press the Power button
again.
Unplug the product and let it
cool down for 60 minutes
before you use it again.

and start again.
Unplug the product an let it
cool down before using it
again.
This is normal and does not
mean that the product is
faulty.
The product has just
finished its auto timer
session and has
automatically switched to
standby mode.

product continuously for 45

protection has been


applied on the product.
The product is likely to be

Noise is made by the
mechanical parts of the
product.
Problem Possible Cause Suggestion
Troubleshooting