User's Manual

- 2 -
4) The amplifier needs to be initialized for the first time.
5) If USB Wireless Trigger is matched, continue to install the driver.
3. Signal Acquisition
1) The ZhenTecBCIServer is used to collect and record the EEG signals.
4. Contraindications
1) Severe scalp trauma, severe brain trauma, allergy to conductive paste.
2) Restlessness,anxiety,confusion.
5. Security Information
1) This product is only used for Neuroscience Research，
2) Do not touch the device while monitoring is in progress.
3) This product has no waterproof protection, so it is forbidden to use when the product is wet.
4) This product is easily affected by other Radio-Frequency equipment.
5) The use of unmatched cables or electrodes may result in higher EMC emissions and lower EMC
immunity.
6) Forbidden: Patients with implanted pacemaker, Intracranial electrodes, implantable defibrillators,
craniopathy or other prosthesis.
6. Cleaning
1) Turn off the Wireless EEG/ERP Multichannel Amplifier;
2) Take the Wireless EEG/ERP Multichannel Amplifier off the EEG cap;
3) Soak the EEG cap in warm water for 10-15 minutes, and then dissolve the conductive paste. A
small amount of residual conductive paste can be washed with the attached cleaning brush;
4) Hang the cleaned EEG cap in a ventilated place and dry in the shade.