Smart Trolley-S600 Product Manual SuperHii Technology
Contact Us Address: 1804-1904, Block A, National Digital Publishing Base, Yanta District, Xi’an City, Shaanxi Province, China Service Hotline400-877-6002 Emailservices@superhii.com Websitewww.superhii.
Version Description: Version V2.
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. Table of Contents Precautions for Usage ................................................................................................ 5 Product Features ........................................................................................................ 5 2.1 Featured Elements ................................................................................................ 5 2.2 Schematic Diagram of Plug-in Magnetic Alternating Charging (Patented ..........
1. Precautions for Usage 1) Internet: The trolley shall be used in good network conditions. If the trolley connects with public network in a store, a network segment shall be used specifically for the trolley with password. 2) Deactivation Maintenance: If the trolley is going out of service, the smart terminal shall power off after fully charging the trolley; when the trolley is going to be activated, turn on the power and then charge the trolley.
10.
3. Smart Trolley Component Diagram and Parameters 3.1 Trolley Body Component Diagram Indicator Light Scanner DC Charging Port Smart Terminal Main Switch Magnetic Charging Spot Magnetic Charging Spot (Front) (Rear) 3.2 Trolley Parameter Table Smart Model Trolley-S600 LST-S02W Terminal Model Overall Size 764*560*1184mm Display Vertical Basket Size 640*430*347mͧMAX) Wheel 4 Inch Elevator Wheel /Silent Wheel Basket Material Engineering Plastic Overall Weight Around 15kg DC2.1x5.5mm 36V, >1.
3.3 Smart Terminal Parameter Table Hardware Description Configuration PCB Board Processor Highly Integrated Circuit Board ARM Cortex-A53 (Qualcomm 64, 8 Core, 1.8+GHz) 4GB RAM+64GB ROM (optional) Memory 2GB RAM+16GB ROM OS Touch Screen Android 9.0 Display: 10.1inch IPS HD 1280*800 Touch Screen: 5 Points 2Million Front---Login Recognition Verification Camera 5Million Rear--- Product Information Monitoring 5Million Side---Scenario Information Monitoring (Optional) WiFi 2.4G&5G Dual FrequencyͫIEEE802.
Electric Protection Protection Against Overcurrent, Working Temperature -20ć~70ć; Overvoltage Charging, Overload, Environment Humidity 20%~90%RH Storage Temperature-40ć~85ć; Environment Humidity 10%~95%RH Short Circuit, Under-voltage Discharge, and Protection for Charging Current and and Discharging Voltage and Temperature Control 4. Trolley Assembly 4.1 Component Diagram 3 M5*25mm Screws 4.
fastened tightly to avoid damage lines. 3) Fasten the smart terminal on the trolley body with 3 “M5*25 hexagon socket head cap screws with flat spring washer” as shown in the diagram 4.1 and then check whether there is gap on the rear end. If there is a big gap, adjust the installation to avoid pressing lines. Due to the matched serial number of smart terminal and weight sensor of the trolley, the smart terminal cannot be randomly replaced after installation. 4.
5.2 Precautions for Installation and Usage 1) Due to high voltage, any abnormality of the charging device shall be fixed by professionals instead of users opening outer cover of the device on their own. The device shall be mounted on a wall or upright rod rather than dragging it on ground (which can cause safety problems and reduction of usage life). 2) In installation, the device shall be fastened on a wall with the shell of switching power module grounded. The distance from the ground is 80-100cm.
6) In installation, make sure any scrap iron or other metal object will not go inside the device to avoid short circuit and electric shock. 7) The power socket on a wall for the charging device shall be 1000W or more. To avoid potential safety hazard due to multiple plug-ins/outs, a socket with switch button on it is recommended for daily maintenance and operation (the above diagram only for reference). 5.
(2)Set Up to Connect with the Internet On the home screen, scroll up from the screen bottom to open the built-in App menu. WiFi Connection: ʒ Click on [Setup] App; ʓ Setup-WLAN-Click On Switch-Choose the Right WiFi Name-Connect. 6.3 Software Configuration ʒ On the home screen, scroll up from the screen bottom to open the built-in App menu and then enter “SuperHii”App.
ʓ Enter administrator password chaohichaohi, click on “Yes”button and then the system initialization process starts.
ʔ The initialization process starts with network setup: choose the WiFi in the store or mobile phone hotspot to be connected, enter network password to connect; after connection, click on “Next” to the next step. ʕ The second step is to level PAD: make sure the trolley is level in idle state for 3s. After the trolley automatically record PAD level angle, click on “Next” to the next step.
ʖ The forth step is to configure supermarket information: click on “Supermarket Name” and choose the right store.
ʗ After synchronization, Upgraded will be displayed on the screen. Click on “Ok” and then the initialization process finishes.
ʘ Click on “Ok” button, and the screen will automatically display home page in the system as shown below.
6.4 Charging 1) Charging Method aͨMagnetic Alternating Charging Device Put all trolleys to be charged in place→make sure magnetically attraction between one magnet suction charging spot and the next one Magnetically attract and connect the charging plug of the magnetic suction charging device with the front charging spot of the first trolley Trolley Line-up Magnetic Suction Charging Plug bͨ Charge DC Adapter (Suitable for One Single Trolley) ķPlug the adapter in DC charging port on the smart terminal.
7. Daily Management 7.1 Daily Charging 1) The trolley shall be charged after the store closes every night; 2) The trolley shall be charged for more than 5 hours each night to guarantee normal operation in full load on the next day; 3) Make sure all trolleys turn on normal charging mode when they are charging, which can be indicated by the red indicator light on smart terminal; green light for fully charged. 7.
ĸ Smart Terminal Screen Ĺ Trolley Basket and Body (By Wet Cleaning Cloth) 8.
Screws on the Bottom of Trolley Body (As Follows)
9. Common Fault Analysis and Troubleshooting 9.1 Charging Problem 1) When the trolley is charging, if all indicator lights of the trolley are off and the green indicator light on the mainframe of magnetic charging device is off, check the following items please: Whether the magnetic charging device turns on power; Whether the power meet the requirements of voltage and current for the magnetic charging device.
If the charging problem still exists after checking the above two items, contact the after-sale personnel of SuperHii Technology please. 9.3 Scanning Problem If the scanner with light off cannot read out a bar code: If the problem occasionally occurs, restart the trolley, and scan the code again. If the above method does not work, or the above problem frequently occurs, perhaps the connecting wires of the scanner are loosened or break down.
Enter administrator password: chaohichaohi;
Enter “Weight Setting” option, and if real-time data on the page is not zero, click on the “Zero Setting” button on the bottom;
When zero setting is done, click on the “Back to Shopping” button on the upper left corner of the “Weight Setting” page and go shopping. 10. Warranty Policy After 15 days from the second day of receiving the trolley by a user, if any fault is confirmed as performance failure of non-human damage by the After-sale Service Center of SuperHii Technology, SuperHii Technology will provide repair services to such user.
label damaged or randomly replaced, or water-proof label is discolored; 7) Any damage or functional abnormality of our products due to failure to follow instructions in our Product Manual or connecting our products with accessories not produced by SuperHii Technology; 8) Any wear-down, crack, breaking, broken hole, burning, sealing-off of shell components beyond touch screen in usage; 9) Any damage or fault of our shopping trolley caused by force majeure (such as earthquake, fire disaster, lightning st
SuperHii Technology Address: 1804-1904 , Block A, National Digital Publishing Base, Yanta District, Xi’an City, Shaanxi Province, China Service Hotline400-877-6002 Emailservices@superhii.com www.superhii.com MADE IN CHINA )&& 5DGLDWLRQ ([SRVXUH 6WDWHPHQW 7KLV HTXLSPHQW FRPSOLHV ZLWK )&& UDGLDWLRQ H[SRVXUH OLPLWV VHW IRUWK IRU DQ XQFRQWUROOHG HQYLURQPHQW 7KLV HTXLSPHQW VKRXOG EH LQVWDOOHG DQG RSHUDWHG ZLWK PLQLPXP GLVWDQFH FP EHWZHHQ WKH UDGLDWRU \RXU ERG\ )&& :DU
