Specifications
Table Of Contents
Taurus Series Multimedia Player T30 Specifications
www.novastar.tech
1
Change History
Document Version
Release Date
Description
V1.0.0
2021-08-31
First release
Introduction
The T30 is the third generation of multimedia player created by NovaStar for full-color LED displays. This multimedia
player integrates playback and sending capabilities, allowing users to publish content and control LED displays with a
computer, mobile phone, or tablet. Working with our superior cloud-based publishing and monitoring platforms, the
T30 enables users to manage LED displays from an Internet-connected device anywhere, anytime.
Thanks to its reliability, ease of use, and intelligent control, the T30 becomes a winning choice for commercial LED
displays and smart city applications such as fixed displays, lamp-post displays, chain store displays, advertisement
players, mirror displays, retail store displays, door head displays, shelf displays, and much more.
Features
Output
Loading capacity up to 650,000 pixels
Maximum width: 4096 pixels
Maximum height: 4096 pixels
2x Gigabit Ethernet ports
One serves as primary and the other as backup.
1x Stereo audio connector
The audio sample rate of the internal source is
fixed at 48 KHz. The audio sample rate of the
external source supports 32 KHz, 44.1 KHz, or
48 KHz. If NovaStar’s multifunction card is used
for audio output, audio with a sample rate of 48
KHz is required.
Input
2x sensor connectors
Connect to brightness sensors or temperature
and humidity sensors.
Control
1x USB 3.0 (Type A) port
Allows for playback of content imported from a
USB drive and firmware upgrade over USB.
1x USB (Type B) port
Reserved
1x Gigabit Ethernet port
Connects to a LAN, public network, or computer
for content publishing and screen control.
Performance
Powerful processing capacity
− Quad-core ARM A55 processor @1.8 GHz
−
Support for H.264/H.265 4K@60Hz video
decoding
− 1 GB of onboard RAM
− 16 GB of internal storage
Flawless playback
1x 4K video playback or 2x 1080p video
playback
Functionality
All-round control plans
− Enables users to publish content and
control screens from a computer, mobile
phone, or tablet.
− Allows users to publish content and control
screens from anywhere, anytime.
−
Allows users to monitor screens from
anywhere, anytime.
Switching between Wi-Fi AP and Wi-Fi STA
− In Wi-Fi AP mode, the user terminal
connects to the built-in Wi-Fi hotspot of the
T30. The default SSID is “AP+Last 8 digits
of SN” and the default password is
“12345678”.
−
In Wi-Fi STA mode, the user terminal and
the T30 are connected to the Wi-Fi hotspot
of a router.
Synchronous playback across multiple screens
− NTP time synchronization
−
RF time synchronization (The specified RF
module must be installed.)