XGuard IntelliSwitch Power Switch - Manual

Page: 5 Copyright 2020 XGuard RC. All rights reserved
XGuard IntelliSwitch
A) Polarity for an EC-3 Connector
Positive side of EC3
connector (Flat Side)
Positive wire (Red)
EC3 Connector
(Not Included)
B) Polarity for an XT60 Connector
Positive side of EC3
connector (Flat Side)
Positive wire (Red)
XT60 Connector
(Not Included)
CORRECT BATTERY CONNECTOR POLARITY
Solder the wires
and add heat
shrink tubbing
Solder the wires to the con-
nectors and slide them into
the housing
Warning: Overvoltage
or Reverse voltage
damage is not covered
by warranty
Warning: Overvoltage
or Reverse voltage
damage is not covered
by warranty