XGuard IntelliSwitch Power Switch - Manual

Page: 4 Copyright 2020 XGuard RC. All rights reserved
XGuard IntelliSwitch
PORTS DIAGRAM
Page: 4
Input Port:
Red is Positive (MAX 9 Volts DC)
Black is Negative (GND)
Do not use higher voltage than 2S
LiPo batteries. Overvoltage
or Reverse voltage damage
is not covered by warranty
← Output 1 & Locator Switch (TOP)
← Output 2 (BOTTOM)
ON/OFF
Pushbutton
High-Current Output Port
Buzzer/Alarm