Manual

Page: 7 Copyright 2020 XGuard RC. All rights reserved
INSTALLING THE OPTIONAL XGuard Strobe
(AAVXG0121)
ALARM ACTIVATION
Plug a 3-Conductor 12 Inch Extension With JST
Compatible terminals the Plus’s Alarm port port and
the other side to the XStrobe or the XBuzzer so that
when the unit is activated due to a power failure you
can see or hear the alarm indicator.
In case of a power failure the XGuard Plus will kick
in and give enough time under power for you to land
your aircraft immediately.
While in emergency mode the red LED will blink to
indicate the unit is actively supplying power to your
electronics.
To turn the unit OFF unpower your aircraft and then
press the OFF pushbutton.