User Manual

11
CN3100 Vehicle Modem - Installation Guide - G7609 - 3.0 - DRAFT
The following illustrations show typical antenna configurations. The antennas must be separated by
at least 2 feet (0.6 meters) in horizontal and vertical orientation. This is the minimum separation
distance required for proper operation.
Four antennas are used with an Omni antenna installation. The antennas should be arranged in a
square configuration with two feet (2 ft.) separation on each side.
Two antennas are used with an xMax Vehicle Antenna installation. The antennas should be arranged
either in line or side-to-side, with two feet (2 ft.) separation between the antennas.
Side-to-Side
In-line
For xG Technology Internal Review Only!
DRAFT