Manualshelf

Installation and Operating Manual

ManualsBrandsxG Technology ManualsElectronicsxMax VOIP Base Transceiver Station
12345678910
6
BSN250 Guide
xG Technology Inc. Proprietary and Confidential Information
8. Connect the AC power cable to back of the power supply unit before connecting to the power outlet.
The BSN-250 operates on 100V/240V AC, 50/60Hz and single-phase AC power line. The device is
connected to the AC power line using a standard 3-prongs power connector. This is shown in Figure 3.
ATTENTION: Be sure to follow proper safety precautions when working with electric power cables.
9. Toggle the back power switch to ON, as shown in Figure 3.
Figure 2: Cabling and Wiring – Back View