Installation and Operating Manual

15
xG Technology Inc. Proprietary and Confidential Information
diagnostiCs and troubleshooting
The Web configuration interface provides a Diagnostics screen that you can use to test base station
connectivity with a device in the network, such as the Signaling Controller or the xMonitor. To run a
diagnostics test:
Enter a host name or IP address in the text box.
Click Ping.
The results are displayed in the Results area.
The command line interface can also be used to perform basic diagnostics, and troubleshooting if the Web
configuration interface does not start. The Linux commands ping and traceroute are supported, as well as
the ps command, which can be used to confirm if the Web server module is running, can receive queries,
and can send responses:
To confirm that the Web server module is running:
1.
2.
3.
•
•
•
To confirm that the Web server module can receive queries:
To confirm that the Web server module can send responses: