Installation and Operating Manual

14
BSN250 Guide
xG Technology Inc. Proprietary and Confidential Information
Channel Settings
Using the Web configuration interface menu, click RF Channel Settings to activate or to disable channels.
The screen shows each sector, the available channels, and the channel frequencies, as shown in Figure
7. You can enable up to six channels for each sector, and disable channels in order to avoid sources of
interference.
To enable a channel, click Enable.
To disable an active channel, click Disable.
In both cases, you are prompted for the number of minutes to delay before the channel will become active
or disabled.
•
•
Figure 7: Web Configuration Interface – RF Channel Settings Screen