Operation Manual

Front Panel Status Indicators
There are five LEDs installed on the front Panel. These LEDs will turn Green, Yellow or
Red depending on the status of the xMax BSN200-3S.
The LEDs are shown in the following image:
Figure 7: Status Indicator LEDs
Description of these LEDs is as follows:
LED
Position
LED Label GREEN means Yellow means RED means OFF means
1 – Left Power
• unit is ON
N/A
•
SW fault • No power, or
• 1 of the power
switches is
OFF
2 Ethernet
• solid: Ethernet
connection is
available
• flashing: traffic on
the Ethernet
connection
N/A N/A
• No Ethernet
connection
3 Ethernet
10/100
N/A
•
Ethernet
connection is
100BaseT
N/A
• Ethernet
connection is
10BaseT
4 TX Fault
N/A N/A
•
BSN not
transmitting on
all 3 sectors
• No fault
detected
5 – Right RX Fault
N/A N/A
•
Fault detected
in the RX path
of the BSN
• No fault
detected
xG Technology
Proprietary and Confidential Information
7