Operation Manual

LEDs on the Ethernet Port
A 10/100Mbps RJ-45 Ethernet connector is installed on the rear of the BSN200 as
shown in the following image. The Ethernet Port is used to connect the Base Station to
the backhaul NW and the xMSC.
Figure 6: Ethernet Port LEDs
LED
Position
Color LED
Label
ON means Other meaning
Left Yellow 10/100
•
Ethernet connection is
100BaseT
•
OFF: Ethernet
connection is 10BaseT
Right Green Ethernet
/ Link
•
Ethernet connection is
available
• Flashing (1/4s on, 1/4s
off): traffic on the
Ethernet link
•
OFF: No Ethernet
Connection
xG Technology
Proprietary and Confidential Information
6