User Manual

14
CN3200 Dual Band Routing Modem - Installation Guide - G7604 - Release 1.0
NOTE
Before clicking Save Changes, be sure to write down the new settings, and then keep them
in a safe place for future reference:
SSID:
Security Key:
8. In the Wireless Settings area, enter a unique SSID for the device.
9. Select a security protocol:
1. Click the down arrow next to Security to display a drop down menu.
2. Click the desired security protocol. The best and most secure level of security is WPA2.
3. Enter the desired security key/passphrase in the Shared Key field.
4. After confirming that the settings are written down, click Save Changes.
xG Technology strongly recommends that you change the User Password.
10. To change the User Password, on the right side of the menu bar, click Admin.
NOTES
 The Password is case sensitive.
 Before pressing Enter, be sure to write down the new password for future reference:
New Password:
Enter the User Password, and then click Enter.
The message User password was successfully updated is displayed.
11. At the bottom of the page, click Save Changes, and then on the right side of the menu bar,
click Logout to complete the configuration process.
12. Restore the network adapter to its previous settings.