User Manual

8
CN3200 Dual Band Routing Modem - Installation Guide - G7604 - Release 1.0
• The CN3200 Modem is a 2x4 MIMO device with four antenna connectors
— two Tx/Rx and two Rx-only.
• All connectors are always used.
• The CN3200 Modem is mounted directly to the back of the xMax 900 MHz panel antenna
using the supplied bracket.
• If the recommended configuration is not used, CN3200 Modem should be placed as close as
possible to the antennas for optimum performance.
• The antenna cable lengths should be as short as possible.
• The installed 2.4 GHz antenna is separated from the main xMax antenna. It is mounted
within 3 feet of the main unit and oriented in the same direction as the main 900 MHz
antenna.
FOR OPTIMUM PERFORMANCE
Low-loss cables (LMR® 195/240 or equivalent) are highly recommended.
For additional information, please refer to the Antenna Configuration illustration on page 9.