User Manual

6
CN3200 Dual Band Routing Modem - Installation Guide - G7604 - Release 1.0
The CN3200 Dual Band Routing Modem provides any device connected to its Ethernet port access
to the xMAX network and xMax modem. When paired with a WiFi hotspot it provides access to the
xMAX network to WiFi enabled devices. Alternately, any Ethernet capable device can access the
network via the Ethernet port. The CN3200 Modem is totally protected against dust and moisture.
 The CN3200 Modem is a Power-over-Ethernet (PoE+) device.
The IEEE 802.3at PoE+ standard enables transmission of both data and the power to
operate a device over a single Cat5/5e/6 cable connection.
 The CN3200 Modem REQUIRES a PoE++ adaptor, as supplied.
The device will NOT operate with a low-power PoE switch or adaptor.
Both top Tx RF ports MUST be properly terminated
before power (PoE) is applied to the unit.
Applying power without proper RF port
termination might damage the unit
and void the product warranty.
Public
or
Private
Internet
110-240
VAC,
50-60 Hz
PoE++
Power Supply
CN3200
DATA OVER
ETHERNET
POWER
plus DATA
TERMINATE
BEFORE
POWER UP