User Manual

5
CN3200 Dual Band Routing Modem - Installation Guide - G7604 - Release 1.0
The CN3200 Dual Band Routing Modem is a ruggedized subscriber device. It is waterproof and made
to handle wide temperature ranges. While primarily designed for use in fixed locations, it may also
be used in vehicular applications. It enables any Internet-ready device to connect to the xMax
network, when paired with a WiFi access point either wirelessly or through a wired Ethernet
connection.
This manual provides basic instructions for installation and configuration of the CN3200 Modem. It
also describes how to connect to the xMax Network and then connect Internet-enabled wireless
devices to the xMax Network.
IMPORTANT
The CN3200 Modem is shipped with the parts needed for basic installation and operation. These
items are shown below. Be sure each of these items is included in your product package. If any item
is missing, please contact the place of purchase.
Depending upon the requirements of your installation, you will also need to purchase additional
components such as cables and surge protectors. A checklist of typically required parts is shown in
the Assemble Your Parts and Tools section on page 15.
xMax Panel Antenna
and Cables
2.4 GHz Panel Antenna
with Mounting Bracket
and Cable
PoE++ Power Supply
and AC Power Cord
Ethernet Kit
Ferrite Beads (6)
Installation Bracket
and Hardware