User's Manual

NOTE TO OEMS:

For host manufacturer’s when using a certified module, the following must be adhered

to:

1. If (1) the module’s FCC ID is not visible when installed in the host, or (2) if the

host is marketed so that end users do not have straightforward commonly used

methods for access to remove the module so that the FCC ID of the module is

visible; then an additional permanent external label referring to the enclosed

module: “Contains Transmitter Module FCC ID: PEJ-XKJS7” or “Contains FCC ID:

PEJ-XKJS7” must be used.

2. The host OEM user manual must also contain clear instructions on how end

users can find and/or access the module and the FCC ID.

WARNING

These radio systems shall be installed by a RF/radio professional familiar with the

applicable rules. Installation of all antennas shall be performed in a manner that will

provide at least the MPE Distance from the direction of maximum radiation, to any user

or member of the public and consistent with the settings in the applicable antenna

installation compliance section below.